Reer VISION MXL

9265029_visionSAFETY LIGHT CURTAIN TYPE 2 WITH INTEGRATED MUTING FUNCTION

[button text=”Download PDF” link=”http://www.iacnassociates.com/wp-content/uploads/2014/08/REER-VISION.pdf” style=”default” size=”normal” target=”_blank”]


Type 2 safety light curtain with integrated MUTING function and integrated control functions.
2-sensor Muting logic, with two-way or one-way operating logic.
Muting timeout. Muting enable. Override with two operating modes, selectable.
Integrated Start/Restart Interlock function. Integrated EDM (control of external contactors).
All configurations via hardware through 12-pole M16 main connector.

The excellent performance / price ratio makes Vision MXL the ideal choice for the protection of Type 2 applications with Muting.

Now also available the MXL L and MXL T versions with pre-wired and pre-aligned Muting sensors.

Conforming to:

– 2006/42/CE Machinery Directive
– 2004/108/CE Electromagnetic Compatibility Directive (EMC)
– 2006/95/CE Low Voltage Directive (LVD)
– IEC/EN 61496-1 Ed. 2.1 Safety of machinery – Electro-sensitive protective equipment- General requirements and tests
– IEC/TS 61496-2 Ed. 2 Safety of machinery- Electro-sensitive protective equipment – Part 2:Particular requirements for equipment using Active Optoelectronic Protective Devices
– EN ISO 13849-1 Safety of machinery – Safety-related parts of control systems – Part 1: General principles for design.
– IEC/EN 62061 Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic control systems
– IEC 61508 Functional safety of electrical/electronic/ programmable electronic safety-related systems.
– UL (C+US) for USA and Canada
– ANSI / UL 1998 Software in Programmable Components.

Available Models:

– resolution 30 mm for hand detection
– resolution 40 mm for hand detection
– 2, 3 and 4 beams for access control
The MXL series is recommended for Muting applications: – Where personnel is supposed to access the area under control during the non-dangerous part of the machine cycle (e. g. manual load/unload of product). – For two-way transit of material through the gate to be controlled by the light curtain (e.g. palletizers).
– The MXL U series is recommended for Muting applications: For one-way transit (exit only) of material through the gate to be controlled by the light curtain (e.g.palletizers).
– The MXL L series manages the Muting function in one-way mode and is particularly suitable for protecting the outfeed gates of palletising systems.
– The MXL T series manages the Muting function in two-way mode for the protection of the infeed/outfeed gates in palletising systems.

Technical Specifications:

– Integrated 2-sensor Muting function
– Safety level: Type 2
– Integrated Start / Restart interlock function
– External Device Monitoring feedback input
– Additional Muting Enable safety input
– Maximum scanning range: 8 m
– Power supply 24 Vcc ± 20%
– Operating temperature: 0-55 °C
– Degree of protection: IP 65
– 2 Safety solid state pnp outputs – 500 mA @ 24 VDC – protected against short circuits and overloads
– Connection with M12, 5 poles connector (Emitter) and M16, 12 poles conector (Receiver)
– Correct alignment and beam status indicator Leds
– 3 fastening modes: back slot, side slot or to the top and lower end
– Connection cable max. lenght between light curtains and interface: 100m
– Accesory deflector mirrors for the realization of perimeter protections along up to 4 sides

Ideal for the protection of:

– Palletisers and depalletisers
– Handling and storage systems
– Assembly and disassembly lines
– Robotised areas
– Wood and marble processing machines
– Welding systems and robots

=> Note: where the risk analysis allows the use of category 2 safety equipment