Configuration:
Beam spacing available: from 5 mm to 75 mm.Controlled heights:
– from 150 mm to 1800 mm – models with beams spacing 5 mm
– from 150 mm to 3000 mm – models with beams spacing 10, 25, 30, 50, 75 mm.
Max. range:
– 2 m – models with beams spacing 5 mm
– 6 m – model for automatic warehouses with beams spacing 25, 50, 75 mm
– 12 m – models with beams spacing 30 mm
– 18 m – models with beams spacing 10, 25, 50, 75 mm
Connections with M12 connectors.
Up to 100 m of electrical connections with unshielded cables. Possibility of connection of up to 8 Micron B light curtains as nodes of an RS-485 serial line for simultaneous detection of multiple dimensions and complex measurements.
Available Models:
Models MI AV equipped with two analog outputs (0 … 10 VDC) with programmable functions and two programmable digital outputs
Models MI AC equipped with two analog outputs (4 … 20 mA) with programmable functions and two programmable digital outputs
Models MI B equipped with an RS-485 serial interface with programmable functions and two programmable digital outputs
Models MI C equipped with two antivalent solid state outputs.
Technical Specifications:
– Measurement time: (500 μs + 70 μs x n beams) x N
Where N = scan cycles (1,2,3 selectable)
– Scan cycles: 1, 2, 3 selectable
– Inputs on receiver (Micron A and B only) 1 digital with programmable
functions 0 or 24V
– Outputs:
– Micron MI AV – 2 analog outputs (0-10 VDC) + 2 programmable digital outputs 0 or 24V
– Micron MI AC – 2 analog outputs (4-20 mA) + 2 programmable digital outputs 0 or 24V
– Micron MI B – RS-485 Serial line (up to 8 nodes) + 2 solid state 0 or 24V programmable
(PNP 100 mA at 24 VDC)
– Micron MI C – 2 solid state 0 or 24V antivalent – PNP 100 mA at 24 VDC
– Micron A and B programming interface: USB interface on M5 connector
MicronConfigurator software for PC, with graphic user interface, is supplied with each
light curtain (models A and B only).
Models A and B are provided with an M5 4-pole connector for parameter configuration
and monitoring of the light curtain.
It´s a USB interface to be connected to a PC using the CSU M5 cable.
– Synchronisation between emitter and receiver: Optical or via cable, selectable
– Electrical connections:
– Micron A and B – connector M12 5-pole (emitter), connector M12 8-pole (receiver),
M5 4-pole connector for programming interface
– Micron C – 2 M12 5-pole connectors (emitter and receiver)
– Signalling LEDs for operating status and light curtain self-diagnosis
– Power supply (VDC) 24 ± 20%
– Cross-section dimensions (mm) 28 x 30
|
